Hello, and welcome to Inyopools'
How to Guide Section. In this video, we will discuss
how to recalibrate the salt levels on your Hayward Aqua Rite. Occasionally, the salt level
on the Hayward Aqua Rite may not match the actual
salt level of the pool. If the salt cell is clean
but the salt reading is off, the Aqua Rite
will need to be recalibrated. The following steps will provide a guide
in how to recalibrate a Hayward Aqua Rite. Step one, before recalibrating,
test the water with saltwater test strips
to determine the correct salt level. If the results from your test strip
are not the same as the Aqua Rite, proceed to step two. Step two, with the pump running, move the main switch from auto to off,
and then back to auto. Wait for approximately 10 seconds
for a click inside the panel. Step three, once you hear the click, immediately push
the diagnostics button five times. The system will now begin
to recalibrate. Step four, a number will appear
on the display screen and begin to scroll down.
Once the number on the screen matches
the number from your test strip result, move the main switch from auto
to super chlorinate and back to auto. Step five, the Hayward Aqua Rite
should now be successfully calibrated. If the incorrect salt rating
continues to be a problem, it may be time
to replace the salt cell. Remember, if you have
any further questions, give us at 1-877-372-6038, or visit us online
at www.inyopools.com.
